Iron On Transfer Instructions | Black T-shirt

Preparation

  • Preheat iron for about 2 minutes at maximum temperature
  • DO NOT use steam
  • Place your garment on a hard surface, with at least one layer of material underneath (such as a pillow case)
  • DO NOT USE AN IRONING BOARD
  • Neatly trim the space around the design you require. Leave a border of about 1-3mm for a professional look
  • Straight after carefully peel off the transfer from the blue lined backing paper



Applying

 

  1. Decide where you would like to put the transfer and place it face up on the garment, which should be wrinkle free
  2. Cover the transfer with the clear silicone fixing paper. Iron on top of the silicone fixing paper
  3. Apply pressure, move iron in a circular motion. Concentrate on using the centre of the iron and make sure the EDGES and CORNERS are well ironed
  4. Approximate ironing time is 3-4 minutes
  5. Allow the transfer to cool for 1 minute. Then peel off the silicone fixing paper in a smooth, even movement

 

Care

To make sure you get the most life out of your print, please follow the below instructions.

  • Wash the garment inside out in a washing machine using a 40°C with a spin dry at the end. A full regular wash cycle.
  • DO NOT wash as delicate fabric
  • DO NOT handwash or leave to soak
  • Dry normally in a tumble dryer to enhance the longevity of the image
  • DO NOT iron directly over the transfer